Technical parameters of Haixiong 380T
Technical parameters of Haixiong 380T high-speed injection molding machine |
| Injection Unit：Injection Volume: Generally, it is 1250 ml. The screw diameter may vary depending on different models and applications, usually around 70 – 80 mm. The injection pressure is approximately 150 – 180 MPa, and the injection speed can reach 5.8 seconds per mold. |
| Clamping Unit：Clamping Force: It is 3800 kN. The size of the mold platen varies according to specific models. Generally, the size of the fixed platen and the moving platen is between 1000 mm × 1000 mm and 1200 mm × 1200 mm. The inner spacing of the tie bars is around 800 mm × 800 mm to 900 mm × 900 mm. The maximum opening stroke of the mold is between 800 and 1000 mm. |
| Hydraulic System：The system pressure is usually set between 14 and 16 MPa. The flow rate of the hydraulic pump changes according to different action requirements, generally around 100 – 150 L/min. |
| Electrical Control System：It adopts an advanced PLC control system, which can achieve precise control of actions such as injection, clamping, and ejection. It has multiple control modes and parameter setting functions to meet the production requirements of different products. Meanwhile, it is equipped with a touch screen operation interface, facilitating operators to set parameters and monitor the running status of the equipment. |
| Overall Dimensions and Weight：The overall dimensions are approximately 6000 mm × 1500 mm × 2000 mm, and the weight of the equipment is about 12 – 15 tons. Specific dimensions and weight may vary slightly due to different configurations. |
Request a quotation