Liansheng 210T high speed machine

    Specific Parameter Name Parameter Details
    Clamping Force Around 2100 kN, which ensures the mold is tightly closed to guarantee the dimensional accuracy and appearance quality of products.
    Mold Plate Size The fixed mold plate is approximately square with sides ranging from 900 mm to 1000 mm, and the moving mold plate is about square with sides from 800 mm to 900 mm, adapting to molds of different sizes.
    Distance between Tie Bars Usually between 550 mm and 650 mm, which determines the installation space of the mold and the size range of molds that can be accommodated.
    Mold Opening Stroke Around 600 mm – 800 mm, affecting the convenience of product removal, mold cleaning and maintenance operations.
    Maximum Mold Thickness Generally reaching around 600 mm – 700 mm, limiting the maximum thickness of the molds that can be used. If the mold thickness exceeds this value, it cannot be installed and used normally.
    Minimum Mold Thickness Usually around 250 mm – 350 mm. If it is less than this value, the mold cannot be installed and fixed correctly, thus affecting normal production.
    Ejector Stroke Generally around 150 mm – 250 mm. It needs to be adjusted according to the product structure and demolding requirements to ensure smooth demolding.
    Ejector Force Around 50 kN – 80 kN, ensuring that the product is reliably ejected during demolding and avoiding remaining inside the mold.
    Screw Diameter Common specifications include 45 mm and 50 mm, adapting to different plastic raw materials and injection molding product requirements.
    Screw Length-Diameter Ratio Generally between 20:1 and 25:1, which affects the plasticizing effect and mixing quality of plastics.
    Theoretical Injection Volume When the screw diameter is 45 mm, it is about 300 cm³  – 400 cm³  or so; when the screw diameter is 50 mm, it is about 400 cm³  – 500 cm³  or so. It determines the volume of plastic injected into the mold each time and affects the size and weight of the product.
    Injection Pressure The maximum injection pressure is generally between 160 MPa and 200 MPa, affecting the filling speed and filling effect of plastics in the mold.
    Injection Speed Usually adjustable between 100 mm/s and 300 mm/s, affecting the appearance quality, dimensional accuracy and production efficiency of the product.
    Heating Power The total is approximately between 15 kW and 25 kW, which is used to heat the barrel and the mold to ensure the smooth progress of the injection molding process.
    Motor Power The power of the main motor is generally between 20 kW and 35 kW, which determines the power output of the injection molding machine and its working efficiency and performance.
    Overall Dimensions of the Machine Approximately 6500 mm * 1500 mm * 2000 mm (length * width * height), determining the space required for installation.
    Weight of the Machine The whole machine weighs about 18 t – 25 t, affecting the requirements for the installation foundation and the difficulty of transportation.
    Category:

    Request a quotation