Haixiong 430T high speed machine

    The following are the common technical parameters of the Haixiong HXH430 high-speed injection molding machine
    Injection Unit
    Injection Volume: It varies depending on configurations such as the screw diameter, generally ranging from about 1500 to 2000 milliliters.
    Screw Diameter: Usually between 80 and 90 millimeters.
    Injection Pressure: 160 – 190 MPa.
    Injection Speed: It is relatively fast and can meet the requirements of high-speed injection molding, completing the injection action within a short time, such as 5 – 8 seconds per mold.
    Clamping Unit
    Clamping Force: 4300 kN.
    Mold Platen Size: The size of the fixed platen and the moving platen is approximately between 1200 mm 脳 1200 mm and 1400 mm 脳 1400 mm.
    Inner Spacing of Tie Bars: Around 900 mm 脳 900 mm to 1000 mm 脳 1000 mm.
    Maximum Mold Opening Stroke: 1000 – 1200 mm.
    Hydraulic System
    System Pressure: 14 – 16 MPa.
    Flow Rate of Hydraulic Pump: Around 150 – 200 L/min to meet the rapid response and stable operation requirements of actions such as clamping and injection.
    Electrical Control System
    It adopts an advanced PLC control system as well as bus communications like CANbus and EtherCAT, enabling fully digital control and precise control of actions such as injection, clamping, and ejection. It also has multiple control modes and parameter setting functions.
    Equipped with a touch screen operation interface, which facilitates operators to set parameters and monitor the running status of the equipment.
    Category:

    Request a quotation